Roche Cobas C311 Chemistry Analyzer

Refurbished Roche cobas c311 Chemistry Analyzer A stand-alone Roche chemistry analyzer for small hospital, satellite and STAT labs, rebuilt Down-To-Frame® to original specification. You save up to 70% compared with buying new, and you can finance with $0 down. The Roche cobas c311 runs up to 300 photometric tests an hour from a 110-position sample disk, with 42 reagent cassette positions plus sodium, potassium and chloride on its ISE unit. Buy it refurbished from Diamond and you pay up to 70% less than a new analyzer. check_circleSave up to 70% compared with a new cobas c311, and lower the capital cost built into every result you report. check_circleKeep 45 tests ready at once, from routine chemistry and electrolytes to drugs of abuse, therapeutic drugs, specific proteins and whole-blood HbA1c. check_circleFinance up to $2 million with $0 down, and roll shipping into the payments. check_circleTrade in the analyzer you're replacing and put its value toward your purchase. check_circleEvery unit is rebuilt Down-To-Frame® by an FDA-registered, ISO 13485:2016 certified refurbisher, then validated with multi-level QC. check_circleOur engineers install it, verify your assays and service it afterward. REQUEST A QUOTE How the Roche cobas c311 handles a small lab's daily workload The cobas c311 is the chemistry half of Roche's cobas 4000 series, built with Hitachi for labs that need Roche chemistry without a core-lab footprint. It's a random-access analyzer. Each sample gets only the tests ordered for it, in any order. Sample handling biotech110 sample positions on two rings. The disk holds 55 samples on the outer ring and 55 on the inner ring, and reads barcodes on both, so a morning batch loads in one pass. check_circleLoad more samples while it runs. You add tubes during operation instead of waiting for the disk to finish. priority_highTrue STAT interrupt. A STAT sample jumps the queue, so an ED potassium or lipase doesn't wait behind a routine run. biotechSmall sample volumes. Tests pipette 1 to 35 µL, and Roche states 75% of c311 applications need less than 5 µL. With 50 µL micro cups, pediatric and short samples still get a full panel. Reagents and calibration check_circle45 tests on board. 42 cassette positions hold photometric reagents, and 3 channels cover sodium, potassium and chloride on the ISE unit. check_circleReady-to-use cobas c packs. Reagents arrive barcoded and need no mixing or preparation, which removes a step where errors happen. check_circleLong on-board stability. Reagents stay usable on the analyzer for up to 3 months, so low-volume and esoteric tests don't expire before you use them. scienceLot calibration on most tests. Roche states over 90% of c311 reagents need calibration only at a new lot, which means fewer calibrator runs and less reagent spent on calibration. Result integrity biotechSerum indices on every sample. The c311 measures lipemia, hemolysis and icterus and flags results those interferences could affect. check_circleClot detection. Pressure sensors catch clots before they produce a bad result or a blocked probe. check_circleUltrasonic mixing. Nothing touches the reaction mix, so there's no stirrer carryover and no stirrers to clean or replace. check_circleAutomatic rerun and dilution. Out-of-range results rerun and dilute (3 to 121 times) without a tech pulling the tube. Throughput The c311 runs up to 300 photometric tests an hour and up to 450 ISE tests an hour on electrolytes alone. Because it uses the same cobas c reagents and applications as Roche's larger cobas analyzers, a c311 can back up or sit alongside a cobas c501 or cobas 8000 in the same network with comparable results. The cobas c311 test menu More than 130 assays and applications are suitable for the cobas c311, so one analyzer can cover routine chemistry and much of the specialty work a small lab would otherwise send out. CategoryExamples on the c311 menu Electrolytes (ISE)Sodium, potassium, chloride SubstratesGlucose, BUN, creatinine (enzymatic and Jaffé), albumin, total protein, calcium, magnesium, phosphorus, bilirubin, uric acid, lactate, ammonia, bicarbonate, iron LipidsCholesterol, HDL, LDL, triglycerides EnzymesALT, AST, ALP, GGT, LDH, CK, CK-MB, amylase, pancreatic amylase, lipase, cholinesterase Specific proteinsCRP, high-sensitivity CRP, IgA, IgG, IgM, C3c, C4, ferritin, transferrin, haptoglobin, cystatin C, D-dimer, lipoprotein(a) DiabetesWhole-blood HbA1c with no manual pretreatment, fructosamine Therapeutic drugsDigoxin, vancomycin, gentamicin, tobramycin, phenytoin, carbamazepine, valproic acid, lithium, theophylline, acetaminophen, salicylate Drugs of abuseAmphetamines, barbiturates, benzodiazepines, cannabinoids, cocaine metabolite, opiates, methadone, ethanol The 3 ISE channels sit outside the 42 reagent positions, so electrolytes don't take space from the rest of your menu. Assay availability varies by country, so send your menu with your quote request and we'll confirm what runs on the unit you're buying. Planning your site for a cobas c311 The cobas c311 is a floor-standing analyzer about 134 cm (53 in) wide and 86 cm (34 in) deep, weighing 270 kg (595 lb). Plan these before delivery: local_shippingDelivery path. At 86 cm deep, the c311 is close to the clear width of many interior doors. Measure doorways, corners and elevators between the dock and the lab. water_dropDeionized water. It uses up to 12 L of bacteria-free DI water an hour at 1.0 µS/cm or better, at 49 to 343 kPa and 15 to 30 °C. If your lab has no DI loop, budget for a water system. water_dropDrain. It needs a central drain within reach, with the waste outlet no more than 100 mm above the floor. engineeringPower. 1.5 kVA, on 230/400 V three-phase or 110 V single-phase supply at 50 or 60 Hz. Confirm your configuration with us before install. thermostatRoom conditions. 15 to 32 °C and 45 to 85% relative humidity, non-condensing. Labs that run dry in winter may need humidity control. Noise stays under 65 dB. Dimensions (W x D x H)133.8 x 85.5 x 126.2 cm (52.7 x 33.7 x 49.7 in) Weight270 kg (595 lb) Power230/400 V three-phase (3/N/PE) or 110 V; 1.5 kVA; 50 or 60 Hz WaterBacteria-free DI water, 1.0 µS/cm max; up to 12 L/hour; 49 to 343 kPa; 15 to 30 °C DrainCentral drain port, 50 mm diameter; waste outlet no more than 100 mm above the floor Room temperature15 to 32 °C Humidity45 to 85% RH, non-condensing NoiseUnder 65 dB Who uses a refurbished Roche cobas c311? check_circleSmall and community hospitals. A c311 covers metabolic panels, electrolytes, lipids, liver enzymes, CK and CK-MB around the clock without the space or capital a high-volume system needs. priority_highSatellite and STAT labs in a Roche network. It runs the same cobas c reagents as the larger cobas analyzers in your core lab, so results line up across sites and staff move between them without retraining on a new menu. local_hospitalPhysician groups and multi-specialty clinics. Bringing CMPs, lipid panels and HbA1c in-house shortens the wait for results that would otherwise go to a reference lab. check_circleToxicology and pain management labs. Drugs-of-abuse screens and therapeutic drug monitoring run on the same analyzer as routine chemistry. account_balanceLabs replacing an aging analyzer on a fixed budget. A refurbished c311 brings a broad Roche menu in for far less than new, with financing to spread the cost. What a refurbished cobas c311 costs A refurbished cobas c311 from Diamond costs up to 70% less than a new one. We don’t publish a fixed price because two c311s can differ in ways that change the number. Your quote depends on: paymentsYear of manufacture and software version. Later builds with current software cost more. check_circleThe ISE unit. A c311 with the ISE costs more than one without, and it saves you running electrolytes on a second analyzer. water_dropWhat comes with it. Water system, UPS, printer and starter consumables all change the total. engineeringInstallation and validation. Install, assay verification and staff training at your site. handymanYour service plan. Platinum, Gold, Silver or Bronze coverage, or per-visit support. swap_horizYour trade-in. The analyzer you're retiring comes off the price. Spread the cost with financing •Finance or lease up to $2 million, with application-only approval up to $400,000. •Start at $0 down with a low introductory payment. •Get a fast credit decision and terms that fit your budget cycle. •Roll shipping and other costs into the same payments. Send your daily volume and test menu, and we'll quote the c311 build that fits them. REQUEST A QUOTE Cobas c311 alternatives and which Roche chemistry analyzer fits your volume check_circleChoose the cobas c311 if you need Roche's broad chemistry menu, electrolytes and HbA1c at up to 300 photometric tests an hour, at a refurbished price. check_circleChoose the cobas c111 if you run a physician office or very small lab and want a benchtop analyzer with a smaller menu and footprint. check_circleChoose the cobas c501 if your volume has outgrown the c311. As the chemistry module of the cobas 6000, it runs up to 1,000 tests an hour with 60 reagent positions, and it can pair with an immunoassay module on one sample line. check_circleChoose the cobas pure c303 if you want the c311's successor. It keeps 300 photometric tests an hour, runs up to 750 tests an hour in mixed photometric and ISE mode, and uses Roche's newer reagent generation, at a higher price than a c311. Why buy your refurbished cobas c311 from Diamond Refurbished Down-To-Frame®, not just used A used c311 from an auction or broker comes as it left its last lab. Its probes, photometer lamp, reagent disk cooling and ISE electrodes are wherever its last owner left them. A Diamond c311 is stripped to the frame, rebuilt with new probes, syringes, seals, tubing and reagent lines, and validated with multi-level QC before it's crated. Diamond is FDA registered and ISO 9001:2015 and ISO 13485:2016 certified in the US and the EU. Installed, verified and serviced by our engineers •Our engineers install the c311 and verify your assays on site. •Your staff get trained on the analyzer before it goes live. •Every unit is eligible for our field service plans, from Platinum with next-day response to per-visit support. Trade in the analyzer you're replacing We may take your old analyzer in trade, handle the deinstall and decontamination, and put its value toward your c311. REQUEST A QUOTE Roche cobas c311 FAQ What is the throughput of the cobas c311?Up to 300 photometric tests an hour, and up to 450 tests an hour when it runs electrolytes alone on the ISE unit. How many tests does the cobas c311 hold on board?45: 42 reagent cassette positions for photometric tests, plus sodium, potassium and chloride on the ISE. Can the cobas c311 run HbA1c?Yes. It measures HbA1c from whole blood in random access, with no manual pretreatment of the sample. What's the difference between the cobas c311 and the cobas c111?The cobas c111 is a compact benchtop analyzer for very small labs and physician offices. The c311 is a floor model with a 110-position sample disk, a larger menu and higher throughput. Who services a refurbished cobas c311?Our field engineers. Every c311 we sell is eligible for our service plans, and we also offer preventive maintenance, depot repair and phone support. What water supply does the cobas c311 need?Bacteria-free deionized water at 1.0 µS/cm or better, up to 12 L an hour during operation.

Performance & Configuration