Diamond Logo
Diamond Logo
Diamond Refurb Banner Recycle Your Instrument

Due to tighter healthcare budgets and increased environmental awareness, many laboratories and distributors are pursuing options to extend the use life of instrumentation they currently own. If you are satisfied with the performance of your analyzer, but would like to enhance its appearance and extend its use life considerably, please consider recycling your analyzer with Diamond Diagnostics. In a few short weeks, Diamond Diagnostics can transform the outer and inner physical condition while refreshing the entire analyzer through its Down-To-Frame® refurbishing process. By providing your own analyzer for this process, there is considerable savings and you are assured of working with an analyzer you are already comfortable with.

REQUEST MORE INFO+
The Refurbishment Process

Every analyzer undergoes a systemized, rigorous and unique Down-To-Frame® Refurbishment process to rebuild each analyzer to its original specification and intended use. Please rollover each step below, to highlight each stage of the process.



The Process Step by Step
1
Disassembly
2
Aesthetics
3
Refurbishment
4
Diagnostics
5
Validation
6
Final Packing

Disassembly & Decommission

  • System decommissioned from laboratory and decontaminated
  • Preliminary inspection of functionality
  • System disassembled Down-To-Frame®
The Organization

Diamond Diagnostics is a vertically integrated refurbishing company specializing in Blood Gas, Electrolyte, Chemistry, Immunology, Hematology and Coagulation. We are recognized as the largest volume, high quality refurbishing facility in the United States.

  • Registered and currently compliant with US Food and Drug Administration
  • All instrumentation is CE marked for circulation within the European Union
  • ISO 9001:2015 and ISO 13485:2016 were achieved in 2005.
  • All departments operate under strict compliance with cGMP and ISO standards
  • More than 1200 systems refurbished annually
  • All facets of the refurbishing process are conducted on site
ISO
ISO
Facebook
Instagram
Contact Us

Corporate Headquarters (USA)
Diamond Diagnostics Inc.
333 Fiske Street
Holliston, MA 01746-2048
Tel: +1 508.429.0450

Distribution Center (EU)
Diamond Diagnostics Kft.
1044 Budapest, Hungary
Óradna Street 6
Tel: +36 (1) 787 2222

Quality

ISO 9001:2015 (US)
ISO 9001:2015 (EU)
ISO 13485:2016 (US)
ISO 13485:2016 (EU)

Diamond Diagnostics Inc. is registered with the United States Food and Drug Administration as an Initial Importer Manufacturer and Contract Manufacturer. Establishment registration and device listing can be found under ID: 3003030793.

Diamond has been registered with the Food and Drug Administration since 2001 and regulated by its cGMP system requirements.

All products manufactured by Diamond carry the necessary FDA clearance and comply to the European Union IVD Directive. Every department and function in our company is standardized, controlled and routinely audited.

FDA logo

The names and logos of manufacturers, their instruments, and their products referred to herein may be protected by trademark or other law, and are used herein solely for purpose of reference. Products are available for international distribution only unless otherwise indicated. Diamond Diagnostics expressly disclaims any affiliation with products it does not manufacture, as well as sponsorship by other manufacturers. For current regulatory status on products within this website, please contact your sales representative. Prices and Information shown are for reference only and may change without notice. SmartLyte®, ProLyte®, CareLyte®, and Down-To-Frame® Refurbishing are Registered Trademarks of Diamond Diagnostics®.

©2021 Diamond Diagnostics®All Rights Reserved.