Beckman DXC 700AU Chemistry Analyzer

Refurbished Beckman Coulter DxC 700 AU Chemistry Analyzer Beckman Coulter DxC 700 AU is the current mid- to high-volume AU chemistry analyzer, rebuilt Down-To-Frame® and verified in your lab. Save up to 70% compared with new. The Beckman Coulter DxC 700 AU runs up to 800 photometric tests an hour, or up to 1,200 with its ISE module, with 63 assays on board and a 150-sample rack feeder. It loads reagents while it measures, runs on Windows 10, and uses the same standardized reagents as Beckman's other AU analyzers. A refurbished DxC 700 AU from Diamond Diagnostics costs up to 70% less than new. check_circleSave up to 70% compared with a new DxC 700 AU. check_circleRun up to 1,200 tests an hour on the DxC 700 AU with ISE, with 63 assays on board. check_circleAdd reagents without pausing the run. check_circleSwap common parts in three steps and under 60 seconds, with no tools. check_circleRun it standalone on the rack feeder, or sample straight from an automation track. check_circleFinance with $0 down, and trade in the analyzer you're replacing. REQUEST A QUOTE What the Beckman DxC 700 AU does for a mid- to high-volume lab Beckman built the DxC 700 AU by putting the operating design of its DxC line on top of AU chemistry. It measures by spectrophotometry and indirect ISE on serum, plasma, urine, whole blood for HbA1c and other fluids, and Beckman says its interface cuts the number of test-processing steps by 30%. trending_upThroughput and menu. Up to 800 photometric tests an hour, or 1,200 with ISE, with 63 assays on board on ISE units. The ISE handles up to 200 samples an hour, or up to 600 tests an hour in ISE-only mode. Open channels let you add applications of your own. biotechSample handling. The rack feeder holds 150 samples in barcoded racks of ten and loads continuously. A refrigerated STAT carousel holds 22 more, for STAT samples, calibrators and QC. Each test uses 1 to 25 µL of sample in 0.1 µL steps. autorenewReagents on the fly. Load reagents while the analyzer is in measure mode, so a bottle change doesn't stop the run. scienceHbA1c on the chemistry line. Beckman's HbA1c Advanced assay runs on whole blood with total precision of 2% CV or better. buildLess downtime. Common parts such as probes, mixers and syringes come out in three steps or fewer and under 60 seconds, without tools. Clot detection clears blocked aspirations automatically, and STAT samples interrupt the routine queue with automatic repeat testing. updateA current workstation. The DxC 700 AU runs Windows 10. Microsoft ended Windows 7 support in 2020, which matters if your IT team audits lab instruments. Run the DxC 700 AU standalone or on your automation line The DxC 700 AU analyzer is available in two sample-input versions, each with or without ISE. crop_squareRack feeder version. Load samples through the 150-sample rack feeder and the refrigerated STAT carousel. conveyor_beltDirect track sampling (DTS) version. Sample straight from a Beckman automation track, with no rack feeder and no reracking. Labs on pre-analytical automation, or linking chemistry with an immunoassay analyzer, use this version. Both versions run the same assays, reagents and software, and connect to your LIS and Beckman middleware. Tell us whether your DxC 700 AU will run standalone or on a track, and we'll match you to the right unit. CHECK AVAILABILITY Which labs buy a refurbished Beckman DxC 700 AU analyzer? The DxC 700 AU chemistry analyzer is sized for mid- to large-sized hospitals and labs that need up to 1,200 chemistry results an hour from one analyzer. local_hospitalHospital core labs. Run routine chemistry, electrolytes and HbA1c on one analyzer, with STAT samples interrupting the queue. sync_altLabs replacing an AU680. Keep your AU reagents, test menu and reference ranges, and move to Windows 10, reagent loading mid-run and quicker part swaps. Pricing a refurbished AU680 as well? We can quote both. conveyor_beltLabs on Beckman automation. Put a DTS unit on the track, alongside your immunoassay analyzer and pre-analytical automation. content_copyHealth systems standardizing on AU chemistry. Match reagents and reference ranges with the AU analyzers at your other sites. paymentsLabs that want a current analyzer without new-analyzer pricing. Get the same platform Beckman sells today for up to 70% less. CONTACT US FOR INFO DxC 700 AU with ISE or without The ISE module adds sodium, potassium and chloride and raises the analyzer's ceiling from 800 to 1,200 tests an hour. The rest of the analyzer is identical. scienceDxC 700 AU. Up to 800 photometric tests an hour, for labs that run electrolytes on a blood gas or standalone electrolyte analyzer. boltDxC 700 AU with ISE. Up to 1,200 tests an hour and 63 assays on board, with ISEs rated for long onboard life and replaced one electrode at a time. view_weekConfigurationDxC 700 AU Beckman ref.B98655 Sample input150-sample rack feeder Photometric tests/hour800 Up to (tests/hour)800 Assays on board60 photometric view_weekConfigurationDxC 700 AU with ISE Beckman ref.B98654 Sample input150-sample rack feeder Photometric tests/hour800 Up to (tests/hour)1,200 Assays on board63 view_weekConfigurationDxC 700 AU DTS Beckman ref.B98657 Sample inputDirect track sampling Photometric tests/hour800 Up to (tests/hour)800 Assays on board60 photometric view_weekConfigurationDxC 700 AU DTS with ISE Beckman ref.B98656 Sample inputDirect track sampling Photometric tests/hour800 Up to (tests/hour)1,200 Assays on board63 DxC 700 AU or AU680? Both run the same number of photometric tests an hour, with the same number of assays on board and the same AU reagents. The DxC 700 AU loads reagents while it measures, runs on Windows 10 and takes 30% fewer steps to process tests. The AU680 costs less to buy refurbished, so it suits labs that want the throughput without the newer workflow. Tell us your daily volume and how you run electrolytes now, and we'll recommend a configuration. CHECK AVAILABILITY Site planning for the DxC 700 AU: floor space, power, water and drain The DxC 700 AU analyzer measures 125 cm (49.2 in) wide, 89 cm (35 in) deep and 130 cm (51.2 in) tall, and weighs about 460 kg (1,015 lb). On the rack feeder version, the rack feeder sits alongside it as a second unit, about 73 cm (29 in) wide, 104 cm (41 in) deep and 94 cm (37 in) tall, at 165 kg (363 lb). Add service clearance around both before you mark out the floor. electrical_servicesPower. Supply 200 to 240 V. water_dropWater. Plumb deionized water, CAP Type II and bacteria-free. Mean consumption is about 28 L an hour. recyclingDrain. Run a drain to the analyzer location for liquid waste. lanLIS and automation. Connect to your LIS and Beckman middleware, or to the automation track on DTS units. RequirementValue Analyzer (W x D x H)125 x 89 x 130 cm (49.2 x 35 x 51.2 in)Analyzer weightAbout 460 kg (1,015 lb)Rack feeder unit (W x D x H)73 x 104 x 94 cm (29 x 41 x 37 in), 165 kg (363 lb)Power200 to 240 VWaterDeionized, CAP Type II, bacteria-free; mean consumption about 28 L/hourDrainRequiredSoftwareWindows 10 Send us your room layout and utilities, and we'll check them against the DxC 700 AU before you buy. Beckman DxC 700 AU price: refurbished compared with new A refurbished Beckman Coulter DxC 700 AU chemistry analyzer from Diamond Diagnostics costs up to 70% less than buying new, and you own it. We quote each unit individually, because configuration, sample input version and services vary. Questions to ask about a pre-owned DxC 700 AU •Is it the rack feeder or the DTS version, and does it have the ISE module? •When was it built, and what software version does it run? •Can the seller document decontamination? •Which probes, syringes, mixers, seals and tubing were replaced? •Can you see current calibration and multi-level QC results? •Who installs it, programs your assays and verifies them? •Who services it afterward, and does it come with a warranty? Every refurbished DxC 700 AU from our team is decontaminated, rebuilt with new wear parts, calibrated and validated with multi-level QC before it leaves our facility, then installed and verified in your lab by our engineers. What goes into the price of a refurbished DxC 700 AU •Rack feeder or DTS version. •Whether it has the ISE module. •Installation, assay programming and verification. •Operator training. •The service plan you choose. •Freight to your site. •Credit for the analyzer you trade in. Why buy a refurbished DxC 700 AU instead of new? paymentsA capital request your committee can approve. Up to 70% less than new for the same platform. keyOwnership without a reagent contract. The analyzer is yours, and the cost isn’t sky high when you don’t include a reagent contract. scienceThe same AU results. It runs the same Beckman AU reagents and applications as a new unit. recyclingLess waste. A rebuilt analyzer uses less energy and raw material than manufacturing a new one, so it fits with your corporate social responsibility KPIs. REQUEST A QUOTE Why buy your DxC 700 AU from Diamond Diagnostics? We take each DxC 700 AU to the frame, validate it on QC, install it in your lab and back it with our own field engineers. verified_user Documented under FDA registration and ISO 13485:2016 Diamond is FDA-registered, and our US and EU operations hold ISO 9001:2015 and ISO 13485:2016 certification. ISO 13485 sets the quality management requirements for medical device manufacturers, so your rebuild follows written procedures that outside auditors check. engineering Installed, verified and handed over to your operators Our engineers install the DxC 700 AU, program your assays and verify them before your first patient sample. Your operators then train with us on site, covering daily operation, test parameters, maintenance and first-line troubleshooting. account_balance Finance your DxC 700 AU from $0 down •Lease or finance purchases up to $2 million. •Get approved for up to $400,000 on an application alone. •Put $0 down and start with low introductory payments. •Get a fast credit decision and choose from a broad range of terms. •Roll shipping and other purchase costs into the financing. swap_horiz Trade in the analyzer you're replacing We credit the value of your current analyzer against the DxC 700 AU. We arrange pickup, pay the freight and handle decommissioning and decontamination, so the old analyzer leaves without disposal or storage costs. REQUEST A QUOTE GET A TRADE-IN VALUE handymanField service for your DxC 700 AU Every DxC 700 AU we sell is eligible for our field service plans, and so is one you already own once we qualify it. •Choose Platinum for next-day response and 24/7 phone support, or Gold, Silver or Bronze down to first-available scheduling. •Book preventive maintenance on the manufacturer's schedule at a fixed cost, including the ISE module on ISE units. •Call or email engineers who specialize in Beckman AU and DxC AU analyzers. •Order AU consumables and service parts, including wash solution, ISE buffer and pump tubing. REQUEST A SERVICE QUOTE Compare service plans FAQ: buying a refurbished Beckman DxC 700 AU Q: What's the throughput of the Beckman DxC 700 AU?A: Up to 800 photometric tests an hour, or up to 1,200 with the ISE module. In ISE-only mode it runs up to 600 tests an hour. Q: How much does a refurbished DxC 700 AU cost?A: Up to 70% less than a new one. We quote each unit on its configuration and sample input version, plus the services you add, and financing starts at $0 down. Q: How many assays does the DxC 700 AU keep on board?A: 63 on ISE units: 60 photometric assays plus sodium, potassium and chloride. Open channels let you add your own applications. Q: How many samples can I load at once?A: 150 in the rack feeder, in racks of ten, plus 22 in the refrigerated STAT carousel. Q: What's the difference between the DxC 700 AU and the AU680?A: Both run up to 1,200 tests an hour with ISE, with 63 assays on board and the same AU reagents. The DxC 700 AU loads reagents while it measures, runs on Windows 10 and takes fewer steps to process tests. A refurbished AU680 costs less. Q: What is the DxC 700 AU DTS?A: The direct track sampling version. It samples straight from a Beckman automation track instead of a rack feeder, for labs running pre-analytical automation. Q: Can the DxC 700 AU run HbA1c?A: Yes. Beckman's HbA1c Advanced assay runs on whole blood, with total precision of 2% CV or better. Q: What does the DxC 700 AU need for utilities?A: 200 to 240 V power, CAP Type II deionized water at a mean of about 28 L an hour, and a drain. Q: What financing is available?A: Leasing and financing up to $2 million, with $0 down and low introductory payments. An application alone covers up to $400,000, and shipping can go into the financed amount. Q: Can I trade in my current analyzer?A: Yes. We credit its value toward your DxC 700 AU and handle pickup, freight, decommissioning and decontamination. Q: Do you install the DxC 700 AU and train our staff?A: Yes. Our engineers install it, program and verify your assays, and train your operators on site. Q: Can you service a DxC 700 AU we already own?A: Yes, once we qualify it. A qualified DxC 700 AU is eligible for the same field service plans as the units we sell. REQUEST A QUOTE

Performance & Configuration