Beckman Coulter DxC 500AU Chemistry Analyzer

Refurbished Beckman Coulter DxC 500 AU Chemistry Analyzer Beckman's current low- to mid-volume AU chemistry analyzer, rebuilt Down-To-Frame® and installed by our engineers for up to 70% less than new. Finance it with $0 down. The Beckman Coulter DxC 500 AU runs up to 400 photometric tests an hour, or up to 800 with its ISE module, from a continuous-loading sample handler that holds 168 tubes. It uses the same standardized reagents, assay protocols and reference ranges as Beckman's other AU analyzers, and it runs HbA1c straight from whole blood. Buy it refurbished from Diamond and save up to 70% compared with new. check_circleSave up to 70% compared with a new DxC 500 AU, and own it outright. check_circleLoad up to 168 tubes as they arrive, in racks that take mixed tube and cup sizes. check_circleRun up to 800 tests an hour on the DxC 500 AU with ISE. check_circleLoad whole blood for HbA1c with no manual sample prep. check_circleKeep calibration curves for up to 90 days, depending on the assay. check_circleFinance with $0 down, and trade in the analyzer you're replacing. REQUEST A QUOTE What the Beckman DxC 500 AU handles on your bench The DxC 500 AU is a random-access analyzer that measures by spectrophotometry and indirect ISE, running colorimetric, turbidimetric and latex agglutination assays on serum, plasma, urine, cerebrospinal fluid and whole blood. biotech Load DxC 500 AU samples as they arrive •Load up to 168 tubes in 24 racks of seven and keep adding racks while it runs. •Mix tube and cup sizes in the same rack and run calibrators, QC and patient samples together without sorting. •Put up to 22 STAT samples, calibrators or controls in the refrigerated STAT carousel. •Aspirate 1 to 25 µL per test in 0.1 µL steps, from tubes 11.5 to 16 mm wide and 55 to 102 mm tall or from nested micro cups. event_repeat Keep reagents and calibrations on board longer •Hold up to 60 analytes in a 76-position reagent carousel refrigerated at 4 to 12 °C, in 15, 30 or 60 mL bottles. •Track tests remaining, expiration date and lot number from each reagent barcode. •Load reagents and consumables while the analyzer runs. •Keep calibration curves for up to 90 days on many assays, with calibrator values assigned from a 2-D barcode. science Run HbA1c and a menu of more than 135 assays •Choose from more than 135 preprogrammed photometric applications, including serum indices and HbA1c, plus sodium, potassium and chloride on ISE units. •Run Beckman's HbA1c assay from whole blood with no manual prep, at up to 65 HbA1c tests an hour in HbA1c-only mode. •Repeat with more or less sample, or pre-dilute automatically from 3 to 100 times, and set your own reflex rules. verified_user Quality checks built into every run •Westgard QC's Six Sigma assessment found the DxC 500 AU assays it tested meet or exceed the CLIA performance specifications that took effect in 2024. •Track QC on Levey-Jennings charts with Westgard multi-rule checks on the analyzer. •Flag lipemia, hemolysis and icterus, with clot detection and probe crash protection. •Work through faults with a step-by-step troubleshooting guide on the touchscreen. •Report to your LIS over Ethernet or RS-232, one-way, bidirectional or with host query. Which labs buy a refurbished Beckman DxC 500 AU? The DxC 500 AU chemistry analyzer is for small and mid-size labs, and for the satellite labs that feed a health system's central lab. local_hospitalCommunity hospital labs. Run routine chemistry, electrolytes and HbA1c on one analyzer, with STAT samples taking priority from the refrigerated carousel. sync_altSatellite and outreach labs in a health system. Match the hub's AU reagents, assay protocols and reference ranges, so results line up across sites. upgradeLabs replacing an older compact AU analyzer. Keep your AU reagents and methods, and gain continuous loading, longer calibration intervals and a current Windows 10 workstation. scienceLabs bringing HbA1c in-house. Load whole blood tubes with the rest of the work, with no manual prep. paymentsLabs that want a current-generation analyzer on a tight budget. Get the newest Beckman analyzer in this class for up to 70% less than new. CONTACT US FOR INFO DxC 500 AU with or without ISE The DxC 500 AU is available in two configurations. Everything else about the analyzer is the same, so the choice comes down to where you run electrolytes. •DxC 500 AU. Up to 400 photometric tests an hour, for labs that run sodium, potassium and chloride on a blood gas or standalone electrolyte analyzer. •DxC 500 AU with ISE. Adds long-life ISEs for sodium, potassium and chloride and reaches up to 800 tests an hour, or up to 600 in ISE-only mode. view_weekConfigurationDxC 500 AU Beckman ref.C87023 Photometric tests/hour400 Up to (tests/hour)400 ISE-only modeNo ISE HbA1c-only modeUp to 65 tests/hour view_weekConfigurationDxC 500 AU with ISE Beckman ref.C87022 Photometric tests/hour400 Up to (tests/hour)800 ISE-only modeUp to 600 tests/hour HbA1c-only modeUp to 65 tests/hour DxC 500 AU or AU480? The AU480 covers the same volume range at the same throughput, up to 800 tests an hour with ISE, on the same AU reagents. The DxC 500 AU holds 168 samples against the AU480's 80 and loads reagents while it runs. It also offers whole-blood HbA1c without prep and calibration curves that hold up to 90 days on many assays. A refurbished AU480 costs less, and a refurbished DxC 500 AU gives you the current platform. Tell us your daily volume and how you run electrolytes now, and we'll recommend a configuration. CHECK AVAILABILITY Install the DxC 500 AU: space, power, water and drain With its monitor, the DxC 500 AU measures 210 cm (82.7 in) long, 77 cm (30.3 in) deep and 160 cm (63.1 in) tall, and weighs up to 450 kg (992 lb). Leave at least 500 mm (20 in) behind it and on each side, and 635 mm (25 in) in front, for ventilation and service. electrical_servicesPower. Supply 200, 208, 220, 230 or 240 V at 60 Hz. water_dropWater. Plumb a continuous supply of deionized water, CAP Type II or better and bacteria-free, above 0.5 MΩ·cm and filtered to 0.5 µm. The analyzer uses up to 20 L an hour. water_dropDrain. Place the drain within 10 m (33 ft) of the analyzer and no more than 1.5 m (5 ft) off the floor. Expect about 5.5 L an hour of concentrated waste, 7.5 L with HbA1c, plus up to 12 L an hour of diluted waste. thermostatRoom conditions. Keep the room between 18 and 32 °C (64 and 90 °F) at 20 to 80% humidity without condensation, below 2,000 m (6,561 ft) altitude. lanLIS. Connect over Ethernet using ASTM protocol, or over RS-232. RequirementValue Dimensions with monitor (L x D x H)210 x 77 x 160 cm (82.7 x 30.3 x 63.1 in)WeightUp to 450 kg (992 lb)Clearance500 mm (20 in) rear, left and right; 635 mm (25 in) frontPower200, 208, 220, 230 or 240 V, 60 HzWaterDeionized, CAP Type II or better, bacteria-free, >0.5 MΩ·cm, 0.5 µm filtered; up to 20 L/hourDrainWithin 10 m (33 ft), max 1.5 m (5 ft) high; 5.5 L/hour concentrated waste (7.5 with HbA1c), 12 L/hour dilutedRoom18 to 32 °C, 20 to 80% RH, up to 2,000 m altitude, under 60 dBWorkstationWindows 10, 21.5 in touchscreenLISEthernet (TCP/IP, ASTM) or RS-232; unidirectional, bidirectional or host query Send us your room layout and utilities, and we'll confirm the DxC 500 AU fits before you buy. Beckman DxC 500 AU price - refurbished vs. new A refurbished DxC 500 AU from Diamond Diagnostics costs up to 70% less than new, you own it outright, and it runs the same Beckman AU reagents. We price each unit individually, based on its configuration and the services you add. What to ask about any pre-owned DxC 500 AU •When was it built, and does it include the ISE module? •What software version does it run? •Was it decontaminated, and can the seller document it? •Which probes, syringes, seals and tubing were replaced? •Can you see current calibration and multi-level QC results? •Who installs it, programs your assays and verifies them? •Who services it afterward, and what warranty comes with it? Every refurbished DxC 500 AU from Diamond Diagnostics is decontaminated, rebuilt with new wear parts, calibrated and validated with multi-level QC before it leaves our facility, then installed and verified in your lab by our engineers. What sets the price of your refurbished DxC 500 AU •Whether it includes the ISE module. •Installation, assay programming and verification. •Operator training. •The service plan you choose. •Freight to your site. •The trade-in value of the analyzer you're retiring. Why labs buy the DxC 500 AU refurbished paymentsUp to 70% off new. The same current-generation analyzer, with a much smaller capital request. keyNo reagent lock-in. You own the analyzer, so your reagent purchasing stays separate from the hardware. handymanYour choice of service. You decide who services it, and our field service plans cover every unit we sell. recyclingLess waste. A rebuilt analyzer uses less energy and raw material than a new one and stays out of landfill. REQUEST A QUOTE Why buy a refurbished DxC 500 AU from Diamond Diagnostics? You get a current-generation Beckman analyzer, rebuilt from the frame, verified in your lab and supported by our own engineers. verified_user FDA-registered and ISO 13485:2016 certified We're registered with the FDA, and our US and EU operations are certified to ISO 9001:2015 and ISO 13485:2016, the quality management standard for medical device manufacturers. Every step of your DxC 500 AU rebuild follows written procedures that outside auditors check. engineering Installation and on-site training in your lab Our engineers install the DxC 500 AU, program your assays and verify them before you report patient results. Then they train your operators on site: running the analyzer, adding test parameters, scheduled maintenance and first-line troubleshooting. account_balance Spread the cost with $0-down financing •Finance or lease up to $2 million. •Qualify for up to $400,000 on an application alone. •Start with $0 down and low introductory payments. •Get a fast credit decision, with a broad range of terms. •Include shipping and other purchase costs in what you finance. swap_horiz Trade in your current analyzer We credit the value of the analyzer you're retiring against your DxC 500 AU. We schedule pickup, pay the freight and handle decommissioning and decontamination, so you avoid disposal fees and storage space. REQUEST A QUOTE GET A TRADE-IN VALUE handymanDxC 500 AU service plans from Diamond Every DxC 500 AU we sell is eligible for our field service plans, and so is a DxC 500 AU you already own once we qualify it. •Choose Platinum for next-day response and 24/7 phone support, or Gold, Silver or Bronze down to first-available scheduling. •Schedule manufacturer-recommended preventive maintenance at a fixed cost, including the ISE module on ISE units. •Reach engineers who specialize in Beckman AU and DxC AU analyzers by phone or email. •Order AU consumables and service parts, including wash solution, ISE buffer and pump tubing. Compare service plans REQUEST A SERVICE QUOTE DxC 500 AU questions from lab managers Q: How many tests per hour does the Beckman DxC 500 AU run?A: Up to 400 photometric tests an hour, or up to 800 with the ISE module. In ISE-only mode it runs up to 600 tests an hour, and in HbA1c-only mode up to 65. Q: How much does a refurbished DxC 500 AU cost?A: Up to 70% less than a new one. We price each unit on its configuration and the services you add, and financing starts at $0 down. Q: How many samples does the DxC 500 AU hold?A: 168 tubes in racks of seven, loaded continuously, plus 22 positions in the refrigerated STAT carousel. Q: Can the DxC 500 AU run HbA1c?A: Yes. Beckman's HbA1c assay runs from whole blood loaded with the rest of your samples, with no manual prep. Q: How many assays can the DxC 500 AU keep on board?A: Up to 60 analytes in its 76-position reagent carousel, plus sodium, potassium and chloride on ISE units. Beckman offers more than 135 preprogrammed photometric applications for it. Q: What's the difference between the DxC 500 AU and the AU480?A: Both run up to 800 tests an hour with ISE on the same AU reagents. The DxC 500 AU holds 168 samples instead of 80, loads reagents while it runs, and offers whole-blood HbA1c and calibration curves stable up to 90 days on many assays. A refurbished AU480 costs less. Q: Will the DxC 500 AU match results from our other Beckman AU analyzers?A: Beckman built it on the same standardized reagents, assay protocols and reference ranges as its other AU analyzers, so results line up across sites. Our engineers verify your assays at installation. Q: What utilities does the DxC 500 AU need?A: 200 to 240 V power at 60 Hz, a continuous supply of CAP Type II deionized water at up to 20 L an hour, and a drain within 10 m (33 ft) of the analyzer. Q: What financing is available?A: Leasing and financing up to $2 million, with $0 down and low introductory payments. An application alone qualifies you for up to $400,000, and shipping can go into the financed amount. Q: Will you take my current analyzer as a trade-in?A: Yes. We credit its value toward your DxC 500 AU and handle pickup, freight, decommissioning and decontamination. Q: Do you install the DxC 500 AU and train our staff?A: Yes. Our engineers install it, program and verify your assays, and train your operators on site. Q: Can you service a DxC 500 AU we bought elsewhere?A: Yes, once we qualify it. A qualified DxC 500 AU is eligible for the same field service plans as the units we sell. REQUEST A QUOTE

Performance & Configuration