Beckman AU640 Chemistry Analyzer

Refurbished Beckman Coulter AU640 Chemistry Analyzer A mid-volume Beckman AU analyzer with a 150-sample loader, rebuilt Down-To-Frame® to original specification and kept running by our own engineers. Finance it with $0 down. The Beckman Coulter AU640 runs up to 800 photometric tests an hour, or 1,200 with its ISE module, and holds 150 samples in a continuous rack loader for long walk-away runs. It keeps 48 photometric tests on board at once, drawn from two refrigerated reagent compartments. Beckman no longer services the AU640, so we rebuild each one to the frame and support it with our own field engineers. check_circleGet an AU640 stripped to the frame, rebuilt with new wear parts and validated on multi-level QC, instead of a used unit sold as-is straight from another lab. check_circleRun up to 800 photometric tests an hour, or 1,200 on the AU640 with ISE. check_circleLoad 150 samples at a time and keep feeding racks while it runs. check_circleKeep 48 photometric tests on board, plus sodium, potassium and chloride on ISE units. check_circleKeep your cost predictable and manageable with $0-down financing, and trade in your current analyzer. check_circleRely on our engineers for installation, assay verification and ongoing service, since Beckman no longer services the AU640. REQUEST A QUOTE How the Beckman AU640 keeps a mid-volume lab moving The AU640 is a floor-standing, random-access analyzer for routine and STAT chemistry, urine chemistry and homogeneous immunoassays such as specific proteins. It reads endpoint, kinetic and fixed-rate assays, and it was built to the same standard as the rest of the AU line, sharing reagents, consumables, parts and reference ranges with its siblings. biotech 150-sample loading with refrigerated STAT positions •Load 150 samples in barcoded 10-position racks, and add racks during the run. It takes primary and secondary tubes from 11.5 to 16 mm wide and 55 to 102 mm tall, plus nested micro sample cups. •Assign any of 22 enclosed, refrigerated positions to STAT samples, QC material or calibrators. •Aspirate 2 to 50 µL of sample per test, with automatic reruns. water_drop 96 refrigerated reagent positions •Keep 48 first-reagent and 48 second-reagent positions refrigerated at 4 to 12°C, in 15, 30 or 60 mL bottles. •Dispense 25 to 300µL of each reagent per test. science AU640 photometry and mixing •Read reactions in permanent glass cuvettes held in a 37°C dry bath, at 13 wavelengths from 340 to 800 nm. •Mix sample and reagents with rotating paddles after each addition. •Run reactions for up to 8 minutes and 15 seconds. lan Sample checks and LIS connectivity •Check samples for lipemia, hemolysis and icterus, with clot detection and crash prevention on the probes. •Run calibration and QC automatically from cooled positions. •Send results to your LIS over a one-way or bidirectional interface. Which labs buy a refurbished Beckman AU640? The AU640 fits labs that have outgrown a 400-test-an-hour analyzer but don't need a modular high-volume system, and want to maintain responsible, frugal budget practices. local_hospitalCommunity and regional hospital labs. Run it as your main chemistry analyzer, with the 150-sample loader absorbing the morning draw and refrigerated positions held for STAT work. upgradeLabs stepping up from a compact AU analyzer. Double your photometric throughput on the same AU reagents, calibrators and reference ranges. content_copyLabs already running an AU640. Add a second unit or replace a worn one, and keep your methods, QC program and operator training. autorenewOutpatient and outreach labs that batch their work. Load 150 samples and walk away while the analyzer works through them. scienceToxicology and specialty labs. Run urine chemistry, drugs of abuse, therapeutic drugs and specific proteins next to your routine menu. paymentsLabs that need capacity on a tight budget. Get mid-volume throughput for far less than a new analyzer in the same class, backed by our service plans. CONTACT US FOR INFO Pick your AU640. Four versions, one reagent menu Every AU640 version runs the same AU reagents and test menu. The only variables are whether electrolytes run on board and which hardware and software generation you get. crop_squareAU640. Up to 800 photometric tests an hour, for labs that run sodium, potassium and chloride elsewhere. boltAU640 with ISE. Adds the ISE module and reaches up to 1,200 tests an hour. updateAU640e. The later e-Class version, with updated hardware and software. join_innerAU640e with ISE. The e-Class version with the ISE module. add_circleMore tests on board. The AU680 replaced the AU640 at the same throughput and holds 60 photometric tests on board. view_weekVersionAU640 Photometric tests/hour800 Up to (tests/hour)800 Tests on board48 photometric Hardware and softwareOriginal version view_weekVersionAU640 with ISE Photometric tests/hour800 Up to (tests/hour)1,200 Tests on board48 photometric + Na, K, Cl Hardware and softwareOriginal version view_weekVersionAU640e Photometric tests/hour800 Up to (tests/hour)800 Tests on board48 photometric Hardware and softwaree-Class hardware and software view_weekVersionAU640e with ISE Photometric tests/hour800 Up to (tests/hour)1,200 Tests on board48 photometric + Na, K, Cl Hardware and softwaree-Class hardware and software Tell us your daily volume and how you run electrolytes now, and we'll point you to the right version. CHECK AVAILABILITY Make room for the AU640. Floor space, power and water The AU640 measures 185 cm (72.8 in) wide, 80 cm (31.5 in) deep and 121 cm (47.6 in) tall, about 15.9 sq ft of floor before service clearance. electrical_services110V-220V power for the analyzer's 3.6 kVA power supply unit. water_dropPlumb deionized water and a drain. lanConnect to your LIS over a one-way or bidirectional interface. Send us your floor plan and utilities, and we'll confirm the AU640 fits before you commit. RequirementValue Dimensions (W x D x H)185 x 80 x 121 cm (72.8 x 31.5 x 47.6 in)FootprintAbout 15.9 sq ft, before service clearancePower supply unit3.6 kVAWaterDeionized water, plus a drainHost interfaceUnidirectional or bidirectional Buying a used AU640 from another lab? Read this first The AU640 is two generations behind Beckman's current analyzers in this class, and Beckman no longer services it. When you buy a used one, everything that keeps it running after installation falls to you and whoever sold it, and many used AU640s sell as-is through a broker, who sends it directly to you from the previous lab, with no returns. We strongly recommend investing in refurbished instead of used directly from a lab or a broker. Where a used AU640 direct from another lab can let you down buildWorn consumable parts. Probes, syringes, seals, pump tubing and the photometer lamp may be near the end of their life. biotechCuvettes and optics. Scratched or clouded cuvettes and an aging lamp affect every absorbance reading. thermostatReagent refrigeration. Compartments that drift above 12°C cut into onboard reagent stability. boltThe ISE module. Electrodes and the reference valve wear with use and need checking on ISE units. handymanService after the sale. With no manufacturer support, a breakdown means finding an engineer who knows the AU640 and has parts on hand. Questions to ask a used AU640 seller •When was the analyzer built, and is it an AU640 or an AU640e? •Does it have the ISE module, and when were the electrodes and reference valve last replaced? •Can the seller document decontamination? •Which wear parts were replaced, and when? •Can you see current calibration and multi-level QC results? •Who will install it and program your assays? •Who will service it, and how quickly can they get parts? •Is there a warranty, and can you return it if it fails validation? Every AU640 from Diamond Diagnostics is decontaminated, rebuilt with new wear parts, calibrated and validated with multi-level QC before it leaves our facility, then installed and verified in your lab by our engineers. What sets the refurbished AU640 price •Year of manufacture. •Whether it's an AU640 or AU640e, and whether it has the ISE module. •Installation, assay programming and verification. •Operator training. •Your choice of service plan. •Freight and rigging to your site. •Trade-in credit for the analyzer you're replacing. REQUEST A QUOTE Why buy your refurbished AU640 from Diamond Diagnostics? You get an AU640 rebuilt from the frame up, verified in your lab and supported by engineers who specialize in Beckman AU analyzers. verified_user FDA-registered, with ISO 13485:2016 quality systems Our US and EU operations hold ISO 9001:2015 and ISO 13485:2016 certification, and we're registered with the FDA. ISO 13485 is the quality standard medical device makers work to, so your AU640 rebuild follows written procedures that outside auditors check. engineering Installation, assay verification and operator training Our engineers install the AU640, program your assays and verify them before you run patient samples. Your operators then train on site with us, covering daily operation, adding test parameters, maintenance and first-line troubleshooting. account_balance Finance your AU640 with $0 down •Lease or finance purchases up to $2 million. •Qualify for up to $400,000 on a credit application alone. •Pay $0 down and start on low introductory payments. •Get a fast credit decision and choose from a broad range of terms. •Fold shipping and other purchase costs into the financing. swap_horiz Trade-in credit for your current analyzer We buy the analyzer your AU640 replaces and credit its value against the purchase. We schedule pickup, pay the freight and handle decommissioning and decontamination, so it leaves your lab without disposal or storage costs. REQUEST A QUOTE GET A TRADE-IN VALUE handymanService for an analyzer Beckman no longer supports Beckman Coulter no longer services the AU640. Our engineers do and every AU640 we sell is eligible for our field service plans, as is the AU640 you already own once we qualify it. •Choose Platinum for next-day response and 24/7 phone support, or Gold, Silver, or Bronze down to first-available scheduling. •Book fixed-cost preventive maintenance on the recommended schedule. •Call or email engineers who specialize in Beckman AU analyzers. •Order AU service parts and consumables, including wash solution, ISE buffer, photometer lamps and pump tubing. Compare service plans REQUEST A SERVICE QUOTE Questions lab managers ask about the Beckman AU640 What's the throughput of the Beckman AU640?Up to 800 photometric tests an hour. With the ISE module, it reaches up to 1,200 tests an hour, counting sodium, potassium and chloride. How much does a refurbished AU640 cost?We price each AU640 individually, based on its year of manufacture, whether it's an AU640 or AU640e, whether it has the ISE module and the services you add. Financing starts at $0 down. Is a used AU640 worth the lower price?Only if you can confirm its condition and line up service. Beckman no longer services the AU640, and many used units sell as-is. A refurbished AU640 from Diamond is rebuilt to the frame with new wear parts, validated with multi-level QC, installed by our engineers and eligible for our service plans. Does Beckman Coulter still service the AU640?No. Our engineers service the AU640, with field service plans from fixed-cost preventive maintenance up to Platinum coverage with next-day response. What's the difference between the AU640 and the AU640e?The AU640e is the later e-Class version, with updated hardware and software. Both run the same reagents and test menu at the same throughput. Should I buy an AU640 or an AU680?Both run up to 800 photometric tests an hour, or 1,200 with ISE. The AU680 is the newer design and holds 60 photometric tests on board against 48 for the AU640. The AU640 costs less and runs the same AU reagents. How many tests can the AU640 keep on board?48 photometric tests at once, plus sodium, potassium and chloride on ISE units, from 48 first-reagent and 48 second-reagent positions. Will the AU640 match results from my other Beckman AU analyzers?The AU line shares reagents, consumables and reference ranges, so results carry across. Our engineers verify your assays at installation. Can the AU640 run reagents from other suppliers?Yes, on tests where your methods allow. It's an open system, so you can set up user-defined applications. Ask us about the tests on your menu. What does the AU640 need for utilities?Deionized water, a drain and power for its 3.6 kVA power supply unit. Send us your site details and we'll confirm the electrical requirements. What financing is available?Leasing and financing up to $2 million, with $0 down and low introductory payments. A credit application alone qualifies you for up to $400,000, and shipping can go into the financed amount. Can I trade in my current analyzer?Yes. We credit its value toward your AU640 and handle pickup, freight, decommissioning and decontamination. Can you service an AU640 I already own?Yes, once we qualify it. A qualified AU640 is eligible for the same field service plans as the ones we sell. REQUEST A QUOTE

Performance & Configuration