Ca++

Cl-

Na+

K+

Li+

The Choice for Veterinary Laboratories

Calibration

2 point every 4 hours

1 point every measurement

Reproducibility

Within Run (n=20)

Blood, Serum, Plasma

Na+: CV ≤ 1% (120-160 mmol/L)

K+: CV ≤ 2% (2.5-6 mmol/L)

Cl-: CV ≤ 2% (85-130 mmol/L)

iCa+: SD ≤ 0.02 mmol/L (0.8 – 1.5 mmol/L)

Li+: SD ≤ 0.02 mmol/L (0.4 – 1.3 mmol/L)

Urine

Na+: CV ≤ 5% (100-250 mmol/L)

K+: CV ≤ 5% (10-60 mmol/L)

Cl-: CV ≤ 5% (100-250 mmol/L)

(Calcium and Lithium are not typically measured in urine samples)

Output

16x2 place alphanumeric display

16-character width printer

RS232C serial port

Ambient Conditions

15-32°C, Room temperature (60-90°F)

<85% humidity

Power

100-240V ~ 50/60 Hz (self adjusting)

1.6 A max, 50 Watts max

Size

13.2 x 12.4 x 12 inches or 335 x 315 x 295 mm

Weight

14 lbs or 6 Kgs

SPECIFICATIONS:

Sample

Feline, Canine, Bovine, Equine, Swine, Ovine, Open

Sample Type

Whole Blood, Serum, Plasma, or Urine

Sample Size

95 µl

Detection Range

Blood Na+: 40-200 mmol/L

K+: 1.7-15 mmol/L

Cl-: 50-200 mmol/L

Ca+: 0.3-5.0 mmol/L

Li+: 0.2-5.5 mmol/L

Urine Na+: 3-300 mmol/L

K+: 5-120* mmol/L

Cl-: 15-300 mmol/L

*60-120 requires additional dilution

Display Resolution

Na+: 1 mmol/L

or 0.1 mmol/L

K+: 0.1 mmol/L

or 0.01 mmol/L

Cl-: 1 mmol/L

or 0.1 mmol/L

iCa2: 0.01 mmol/L or 0.001 mmol/L

Li+: 0.01 mmol/L or 0.001 mmol/L

Analysis Time

60 sec without printout (60 per hour)

80 sec with printout (45 per hour)

Data Storage

QC: 3 levels

35 days

Calculation of mean, SD, CV

This analyzer is produced and distributed by Diamond Diagnostics Inc. There is no affiliation, connection,

sponsorship or association between Diamond Diagnostics Inc. and Roche Diagnostics or Idexx Laboratories.

333 Fiske Street, Holliston, MA 01746

Tel: 508-429-0450 | Fax: 508-429-0452

www.diamonddiagnostics.com

SOP05-0021F Rev 0 06/02/09